MAKAMID®
Description of Polyamide 6
PA 6
PA 6
impact modified
PA 6
lubricated grades
PA
6 with glass fibre reinforced
PA 6
with glass bead filled
PA 6
with mineral filled
PA 6
with combined reinforcement
PA 6
with carbon fibre reinforced
PA 6 with glass fibre or mineral
reinforced, impact modified
MAKAMID Polyamide 6
MAKAMID Polyamide 6 is available with
different viscosity values. The
following products can be used in
injection moulding and extrusion,
high-viscosity polyamides can also
be used in rotation moulding.
Polyamide modification with improved
UV-stability is also available. For
faster moulding cycles and thus
higher efficiency, polyamides with
higher crystallinity are produced.
|
Product name
|
Type
|
State
|
Remarks
|
|
BV 240
|
PA 6
|
non-reinforced |
low viscosity
|
|
BV 270
|
PA 6
|
non-reinforced
|
normal
viscosity
|
|
BV 270 S
|
PA 6
|
non-reinforced |
normal
viscosity, externally lubricated
|
|
BV 270 P
|
PA 6
|
non-reinforced |
normal
viscosity, high crystallinity
|
|
BV 270 UV
|
PA 6
|
non-reinforced |
normal
viscosity, UV-stabilized
|
|
BV 340
|
PA 6
|
non-reinforced |
medium viscosity
|
|
BV 400
|
PA 6
|
non-reinforced |
medium viscosity
|
|
BV 500
|
PA 6
|
non-reinforced |
high
viscosity
|
to
the top
MAKAMID Polyamide 6 impact modified
MAKAMID
Polyamid 6 impact modified is
available in various modifications.
Depending on their application they
vary from dry impact resistant for
immediate recycling after injection
moulding to high-impact to achieve
sufficient toughness at low
temperatures.
|
Product name
|
Type
|
State |
Remarks |
|
BV 270 ST1
|
PA 6
|
non-reinforced |
low impact resistant
|
|
BV 270 ST2
|
PA 6
|
non-reinforced |
middle impact resistant
|
|
BV 270 ST3
|
PA 6
|
non-reinforced |
high impact resistant
|
|
BV 270 ST4
|
PA 6
|
non-reinforced |
highest impact resistant
|
to
the top
MAKAMID
Polyamide 6 lubricated grades
There are various modifications of
MAKAMID Polyamide 6 with low
sliding friction available.
It is preferably used for production
of bearing bushings, side bearers or
chain links. The composition and
quantity of the lubricant package could be modified on
customer request according the application. With this we
provide much better possibilities to adjust our products for
the requested purpose.
|
Product name
|
Type
|
State |
Remarks |
|
BV 270 Y 10
|
PA 6
|
non-reinforced |
MoS2
modified
|
|
BV 270 G 10
|
PA 6
|
non-reinforced |
graphite modified
|
|
BV 270
TF 2
|
PA 6
|
non-reinforced |
with 10 % PTFE
modified
|
|
BV 270
RF 3 Y 10
|
PA 6 |
with 15% glassfibres |
with
MoS2
modified
|
|
BV 270
RB 6 Y 10
|
PA 6
|
with 30% glasbeads |
with
MoS2
modified
|
to
the top
MAKAMID Polyamide 6 glass fibre reinforced
Glass-fibre reinforced MAKAMID
Polyamide 6 has significantly
better mechanical properties
compared to non-reinforced types.
Its rigidity, dimensional stability
and heat resistance are as well
higher. Glass fibre content from 10
to 50% is available. Only glass
fibres with chemical coupling are
used due to their better mechanical
properties.
|
Product name
|
Polymer
|
Reinforcement
|
Content
|
|
BV 270 RF 2
|
PA 6
|
glass fibre
|
10%
|
|
BV 270 RF 3
|
PA 6
|
glass fibre
|
15%
|
|
BV 270 RF 4
|
PA 6
|
glass fibre |
20%
|
|
BV 270 RF 5
|
PA 6
|
glass fibre |
25%
|
|
BV 270 RF 6
|
PA 6
|
glass fibre |
30%
|
|
BV 270 RF 7
|
PA 6
|
glass fibre |
35%
|
|
BV 270 RF 8
|
PA 6
|
glass fibre |
40%
|
|
BV 270 RF 10
|
PA 6
|
glass fibre |
50%
|
to
the top
MAKAMID Polyamide 6 glass bead filled
In
comparison with non-reinforced PA6,
glass-bead filled MAKAMID
Polyamide 6 has better mechanical
properties. Another advantage is
more uniform mould shrinkage
compared with glass fibre reinforced
polyamide. Therefore, it enables
production of details with fine
surfaces and only a slight
distortion.
|
Product name
|
Polymer |
Reinforcement |
Content |
|
BV 270 RB 2
|
PA 6
|
glass bead
|
10%
|
|
BV 270 RB 3
|
PA 6
|
glass bead
|
15%
|
|
BV 270 RB 4
|
PA 6
|
glass bead
|
20%
|
|
BV 270 RB 6
|
PA 6
|
glass bead |
30%
|
|
BV 270 RB 10
|
PA 6
|
glass bead |
50%
|
to
the top
MAKAMID Polyamide 6 mineral filled
MAKAMID
Polyamide 6 with mineral
reinforcement has very good
mechanical properties, such as low
shrinkage, good flow behaviour.
|
Product name
|
Polymer |
Reinforcement |
Content |
|
BV 270 RM 5
|
PA 6
|
mineral
|
25%
|
|
BV 270 RM 6
|
PA 6
|
mineral
|
30%
|
to
the top
MAKAMID Polyamide 6 with combined reinforcement
MAKAMID Polyamide 6 can have
combined reinforcement of either
glass fibre/mineral or glass fibre/glass
beads. These materials are called
hybrid substances. With their help,
polyamides are now successfully used
in a number of specific fields of
application where high rigidity
along with fine surface, lower
shrinkage and easy processability
are required.
|
Product name
|
Polymer |
Reinforcement |
Content |
|
BV 270 RFM 24
|
PA6
|
glass fibres/mineral
|
10 % / 20 %
|
|
BV 270 RFM 26
|
PA6
|
glass fibres/mineral
|
10 % / 30 %
|
|
BV 270 RFM 35
|
PA6
|
glass fibres/mineral
|
15 % / 25 %
|
|
BV 270 RFB 42
|
PA 6
|
glass fibres/glass beads
|
20 % / 10 %
|
|
BV 270 RFB 62
|
PA 6
|
glass fibres/glass beads
|
30 % / 10 %
|
to
the top
MAKAMID Polyamide
6 carbon fibre reinforced
MAKAMID
Polyamide 6 reinforced with carbon
fibres is a material for specific
application. In comparison to
similar reinforced types, it has
significantly higher rigidity while
its density is low. Very good
antifriction properties. Its
conductive properties are also
different. Carbon polyamide products
are antistatic what means they show
an amazing electric conductivity, as
for plastic.
|
Product name
|
Polymer |
Reinforcement |
Content |
|
BV 270 RC 4
|
PA 6
|
carbon fibres
|
20%
|
|
BV 270 RC 6
|
PA 6
|
carbon fibres
|
30%
|
to
the top
MAKAMID Polyamide 6
glass fibre or mineral reinforced,
impact modified
MAKAMID Polyamide 6 reinforced
with glass fibres or mineral and
high-impact modified is suitable for
application where the moulded
details should be assembled
immediately after moulding. Glass
fibre reinforced and impact-modified
polyamides have perfect rigidity and
improved impact resistance.
Besides, these materials have better
damping resistance and show better
bending strength than the types
reinforced only with glass fibres.
Moreover, the mineral-filled and
high impact types of this polyamide
can be chrome-plated.
|
Product name
|
Polymer |
Reinforcement, Modification |
Content |
|
BV 270 RF 6 ST 1
|
PA 6
|
glass fibre, high-impact modified
|
30%
|
|
BV 270 RF 7 ST 1
|
PA 6
|
glass fibre, high-impact modified
|
35%
|
|
BV 270 RM 6 ST 1
|
PA 6
|
mineral, high-impact modified
|
30%
|
|
BV 270 RM 7 ST 1
|
PA 6
|
mineral, high-impact modified
|
35%
|
to
the top
MAKAMID
Description of Polyamide 6.6
PA 6.6
PA 6.6 high-impact modified
PA 6.6 lubricated grades
PA 6.6 with glass fibre reinforced
PA 6.6
with glass bead filled
PA 6.6
with mineral filled
PA 6.6
with combined reinforcement
PA 6.6
with carbon fibre reinforced
PA 6.6
with glass fibre or mineral
reinforced, impact modified
MAKAMID Polyamide 6.6
Non-reinforced MAKAMID
Polyamide 6.6 is available in
various modifications. The following
products can be used in injection
moulding. Polyamide modification
with improved UV-stability is also
available. For faster moulding
cycles and thus higher efficiency,
polyamides with higher crystallinity
are produced.
|
Product name
|
Type
|
State
|
Remarks
|
|
AV 300
|
PA 6.6
|
non-reinforced |
normal
viscosity
|
|
AV 300 P
|
PA 6.6
|
non-reinforced |
normal
viscosity, high cristallinity
|
|
AV 300 UV
|
PA 6.6
|
non-reinforced |
normal viscosity, UV-stabilized
|
|
AV 300 PN
|
PA 6.6
|
non-reinforced |
normal
viscosity, higher cristallinity
|
to
the top
MAKAMID Polyamide 6.6
high-impact modified
Impact-modified MAKAMID
Polyamide 6.6 is available in
various modifications. Depending on
their application they vary from dry
impact resistant for immediate
recycling after injection moulding
to high-impact to achieve sufficient
toughness at low temperatures.
|
Product name
|
Type |
State |
Remarks |
|
AV 300 ST 1
|
PA 6.6
|
non-reinforced |
low impact resistant |
|
AV 300 ST 2
|
PA 6.6
|
non-reinforced |
middle impact resistant |
|
AV 300 ST 3
|
PA 6.6
|
non-reinforced |
high impact resistant |
|
AV 300 ST 4
|
PA 6.6
|
non-reinforced |
highest impact resistant |
to
the top
MAKAMID Polyamide 6.6 lubricated
grades
There are various modifications of
MAKAMID Polyamide 6.6 with low
sliding friction available.
It is preferably used for production
of bearing bushings, side bearers or
chain links. The composition and
quantity of the lubricant package
could be modified on customer
request according the application.
With this we provide much better
possibilities to adjust our products
for the requested purpose.
|
Product name
|
Type |
State |
Remarks |
|
AV 300 Y 10
|
PA 6.6
|
non-reinforced |
MoS2 modified
|
|
AV 300 G 10
|
PA 6.6
|
non-reinforced |
graphite modified
|
|
AV 300
TF 2
|
PA 6.6
|
non-reinforced |
with 10 % PTFE
modified
|
|
AV 300 AF
|
PA 6.6 |
non-reinforced |
with aramid
modified
|
|
AV 300 AF-TF
|
PA 6.6
|
non-reinforced |
with aramid and PTFE
modified |
|
AV 300 TF-FP1
|
PA 6.6
|
non-reinforced |
with special lubricantl |
|
AV 300 RFTF 63
|
PA 6.6
|
with 30% glassfibre |
with 15 % PTFE modified |
|
AV 300 RFTF 62 Y 10
|
PA 6.6
|
with 30% glassfibre |
with 10% PTFE and MoS2 modified |
|
AV 300 RFTF 63 Si 10
|
PA 6.6
|
with 30% glassfibre |
with 15% PTFE and
silicone modified |
|
AV 300 RFCTF 63 Si
|
PA 6.6
|
with 30% carbonfibre |
with 15% PTFE and
silicone modified |
to
the top
MAKAMID Polyamide
6.6 glass fibre reinforced
Glass-fibre reinforced MAKAMID
Polyamide 6.6 has significantly
better mechanical properties
compared to non-reinforced types.
Its rigidity, dimensional stability
and heat resistance are as well
higher. Glass fibre content from 10
to 50% is available. Only glass
fibres with chemical coupling are
used due to their better mechanical
properties.
|
Product name
|
Polymer
|
Reinforcement
|
Content
|
|
AV 300 RF 2
|
PA 6.6
|
glass fibre |
10%
|
|
AV 300 RF 3
|
PA 6.6
|
glass fibre |
15%
|
|
AV 300 RF 4
|
PA 6.6
|
glass fibre |
20%
|
|
AV 300 RF 5
|
PA 6.6
|
glass fibre |
25%
|
|
AV 300 RF 6
|
PA 6.6
|
glass fibre |
30%
|
|
AV 300 RF 7
|
PA 6.6
|
glass fibre |
35%
|
|
AV 300 RF 8
|
PA 6.6
|
glass fibre |
40%
|
|
AV 300 RF 10
|
PA 6.6
|
glass fibre |
50%
|
to
the top
MAKAMID
Polyamide 6.6 glass bead filled
Compared to non-reinforced PA6.6,
glass-bead filled MAKAMID Polyamide
6.6 has better mechanical properties.
Another advantage is more uniform
mould shrinkage compared with glass
fibre reinforced polyamide.
Therefore, it enables production of
details with fine surfaces and only
a slight distortion.
|
Product name
|
Polymer |
Reinforcement |
Content |
|
AV 300 RB 2
|
PA 6.6
|
glass bead |
10%
|
|
AV 300 RB 3
|
PA 6.6
|
glass bead |
15%
|
|
AV 300 RB 4
|
PA 6.6
|
glass bead |
20%
|
|
AV 300 RB 6
|
PA 6.6
|
glass bead |
30%
|
|
AV 300 RB 10
|
PA 6.6
|
glass bead |
50%
|
to
the top
MAKAMID Polyamide 6.6
mineral filled
MAKAMID Polyamide 6.6 with
mineral reinforcement has very good
mechanical properties, such as low
shrinkage, good flow behaviour.
|
Product name
|
Polymer |
Reinforcement |
Content |
|
AV 300 RM 5
|
PA 6.6
|
mineral
|
25%
|
|
AV 300 RM 6
|
PA 6.6
|
mineral
|
30%
|
to
the top
MAKAMID Polyamide 6.6
with combined reinforcement
MAKAMID Polyamide 6.6 can
have combined reinforcement of
either glass fibre/mineral or glass
fibre/glass beads. These materials
are called hybrid substances. With
their help, polyamides are now
successfully used in a number of
specific fields of application where
high rigidity along with fine
surface, lower shrinkage and easy
processability are required.
|
Product name
|
Polymer |
Reinforcement |
Content |
|
AV 300 RFM 24
|
PA 6.6
|
glass fibres/mineral |
10 % / 20 %
|
|
AV 300 RFM 26
|
PA 6.6
|
glass fibres/mineral |
10 % / 30 %
|
|
AV 300 RFM 35
|
PA 6.6
|
glass fibres/mineral |
15 % / 25 %
|
|
AV 300 RFB 42
|
PA 6.6
|
glass fibres/glass beads
|
20 % / 10 %
|
|
AV 300 RFB 62
|
PA 6.6
|
| |
